木纤维一体压铸 · 出口免熏蒸 · 可回收再生 Wood-fiber moulding · fumigation-free · recyclable

188 5824 9883

木纤维一体压铸托盘 · MP 系列Wood-fiber molded pallets · MP series

木托盘的价,
塑料托盘的寿命,
出口免熏蒸的通行证。
Wood-pallet cost.
Plastic-pallet service life.
Fumigation-free at the border.

以农林与木质废弃物为原料,高温高压一次模压成型。同规格价格约为塑料托盘的七成,循环 50–80 次,出口免熏蒸、免热处理。 Pressed in a single high-temperature, high-pressure shot from agricultural and wood residues. Around 70% of the price of a plastic pallet, 50–80 trips of service life, and no fumigation or heat treatment at the border.

A = 1200 B = 1000 UNIT: mm · FLAT 9-LEG
PJ-1210-122 1200 × 1000 × 122 mm · 16 kg 1200 × 1000 × 122 mm · 16 kg
1.5–2t 动载Dynamic load
3–4t 静载Static load
50–80次 循环使用Trips per pallet
−40~60℃ 适用温度Working temp
0次 出口熏蒸Fumigation required

采购真正在意的四件事What buyers actually care about

托盘不是耗材,是物流里的固定成本。 A pallet is not consumables — it is a fixed cost of your logistics.

每一次出口排队熏蒸、每一年换一批木托盘、每一笔丢失的托盘资产,最后都摊进单件货物的成本。我们只解决这四件事。 Every fumigation queue at the border, every annual replacement round, every pallet that walks off site — all of it ends up in your cost per unit. We address four things only.

01

出口卡在熏蒸Export stuck at fumigation

实木托盘须按 ISPM15 做熏蒸或热处理,排队、返工、处理后还可能变形开裂。模压制品不属于原木包装,无需处理直接出关。 Solid-wood pallets must be fumigated or heat-treated under ISPM15 — queues, rework, and warping afterwards. A molded pallet is not raw-wood packaging: it ships as-is.

02

塑料托盘太贵Plastic is overpriced

同规格注塑托盘价格高、并且跟着油价走。我们的模压托盘目标价约为同规格塑料托盘的七成。 Injection-molded plastic is expensive and tracks oil prices. Our target price is about 70% of a plastic pallet of the same size.

03

木托盘换得太勤Wood wears out too fast

受潮发霉、崩边、钉子外露,木托盘通常 10–30 次就报废。压铸托盘整体成型、无钉无刺,循环 50–80 次。 Moisture, mould, split edges, exposed nails — wood typically dies after 10–30 trips. A one-piece molded pallet has no nails and no splinters, and runs 50–80 trips.

04

资产看不见Assets you cannot see

托盘去哪了、周转了几次、该不该补货,全靠人记。可在成型时预留 RFID 嵌槽,接进现有资产系统。 Where did it go, how many turns, when to reorder — today it is all in someone's head. An RFID cavity can be molded in, feeding your existing asset system.

产品系列Product range

五种结构,覆盖轻载到中载。 Five structures, from light to medium duty.

标准尺寸 1200 × 1000 与 1100 × 1100,动载 1.5–2 t。按货物、叉车类型和是否堆码选结构,不必迁就木托盘的规格。 Standard footprints of 1200 × 1000 and 1100 × 1100 mm, 1.5–2 t dynamic. Pick the structure by cargo, forklift type and whether you stack — you no longer design around lumber sizes.

平板九角Flat 9-LegPJ

九点支撑、面板平整,适合码垛与自动线输送。Nine-point support with a flat deck — built for stacking and automated handling.

动载/静载Dyn./Stat.1.5 / 3 t
重量Weight15–16 kg
查看规格See specs

平板川字Flat 3-RunnerPC

三道纵梁贯通,叉车四向进叉,承载更均匀。Three continuous runners, four-way forklift entry, more even load distribution.

动载/静载Dyn./Stat.2 / 4 t
重量Weight20 kg
查看规格See specs

平板田字Flat GridPT

井字底架,抗弯刚度更高,适合重载与长距离运输。Grid underframe with higher bending stiffness — for heavier loads and long hauls.

动载/静载Dyn./Stat.2 / 4 t
重量Weight20–22 kg
查看规格See specs

重叠九脚Stackable 9-LegDJ

九个脚墩可空托盘嵌套,回程与仓储占用更低。Nine blocks nest when empty — less space on the return leg and in the warehouse.

动载/静载Dyn./Stat.2 / 4 t
重量Weight16 kg
查看规格See specs

重叠田字Stackable GridDT

田字底架 + 可嵌套脚型,兼顾刚度与堆叠效率。Grid underframe with nestable feet — stiffness and stacking efficiency together.

动载/静载Dyn./Stat.2 / 4 t
重量Weight25 kg
查看规格See specs

非标Custom

尺寸、载重、颜色、Logo 可定制Size, load rating, colour and logo are open

模具为新开时,可按你的货架、集装箱和托盘池规格改尺寸与脚型。起订量与开模周期按图报价。With a new mould we can change footprint and feet to your racking, container and pool spec. MOQ and tooling lead time quoted per drawing.

聊聊你的规格Talk about your spec

材料横向对照Side by side

它不是“更便宜的木托盘”,是第三种材料。 It is not a cheaper wooden pallet. It is a third material.

下表为行业典型区间,用于选型参考;我们的实测数据以第三方检测报告为准(见“资质与检测”)。 Figures below are typical industry ranges for selection only. Our measured values will be published from third-party test reports (see Certifications).

对比项Criterion 木纤维模压托盘Wood-fiber molded 塑料托盘(PP/PE)Plastic (PP/PE) 实木托盘Solid wood
原料Raw material 农林剩余物、木质废弃物Agro-forestry and wood residues 石油基 PP / PEPetroleum-based PP / PE 原木、锯材Logs and sawn timber
动载 / 静载Dynamic / static load 1–2 t / 3–4 t 1–2 t / 2–5 t 0.5–1.5 t / 1–3 t
循环次数Trips per pallet 50–80 50–80 10–30
出口处理Export treatment 免熏蒸、免热处理None required 免None required 须 ISPM15 熏蒸/热处理ISPM15 fumigation / heat
防水防潮Water resistance 优(整体密闭成型)Good — closed moulding 优Good 差,易吸潮发霉Poor — absorbs water, moulds
表面与安全Surface and safety 无钉无刺,不伤包装No nails, no splinters 无钉,易打滑No nails, slippery 有钉、有毛刺Nails and splinters
RFID / 资产追溯RFID / asset tracking 可预留嵌槽Cavity can be moulded in 可嵌入Insertable 一般不适用Rarely practical
报废处置End of life 可粉碎再生成型Reground and remoulded 回收体系不完整Collection patchy 焚烧或填埋Burned or landfilled
价格(同规格)Price (same size) 约为塑料托盘的 70%~70% of plastic 基准Baseline 低,但全周期需替换多次Low, but replaced many times

材料与工艺Material and process

把边角废料,压成一张能承重的板。 Offcuts in. A load-bearing pallet out.

采伐剩余物、加工剩余物、废弃木质板材,经破碎、干燥、配混后与环保胶黏体系混合,在模具中高温高压一次成型。没有锯、刨、钉,也没有拼板。 Logging residues, mill offcuts and end-of-life wood panels are chipped, dried and blended with a low-emission binder, then pressed once in a heated mould. No sawing, planing, nailing or board joining.

  • 一次成型,无拼接One piece, no joints 结构强度不依赖钉子和胶合面,不会从拼缝处开裂。Strength does not depend on nails or glue lines, so it cannot fail along a seam.
  • 原料是可再生废料Feedstock is waste 不新增砍伐,把别人要烧掉的边角料变成产品。No additional felling — material that would otherwise be burned becomes the product.
  • 报废后可再生成型Regrind at end of life 旧托盘粉碎后回用,形成闭环,而不是一烧了之。Worn pallets are ground and remoulded — a closed loop rather than an incinerator.
OFFCUTS FIBER MOULD HEAT PRESS · 150–200 °C ONE-PIECE PALLET
工艺示意图 · 非真实产线照片Process schematic — not a production photograph

应用行业Applications

轻载到中载、要出口、要干净的场景。 Light to medium duty, for export, where clean matters.

我们不承诺重载和极端环境。超过 2 t 动载、需要长期户外暴晒的场合,建议继续用塑料或钢制托盘。 We do not claim heavy-duty or extreme environments. Above 2 t dynamic, or long-term outdoor exposure, keep using plastic or steel.

化工与新材料Chemicals

桶装、袋装原料,怕潮怕污染。密闭成型,不吸潮、不掉屑。Drums and bags that must stay dry and clean. Closed moulding absorbs no moisture and sheds no dust.

平板川字Flat 3-Runner平板田字Flat Grid

电子电器Electronics

静电敏感、表面要求高。无钉无刺,可配防静电配方(需确认)。Static-sensitive, appearance-critical. No nails or splinters; anti-static formulation on request (to be confirmed).

平板九角Flat 9-Leg可嵌 RFIDRFID option

汽车零部件Automotive parts

线边配送与循环包装,尺寸稳定、可堆码、可回收。Line-side delivery and returnable packaging: dimensionally stable, stackable, recyclable.

平板川字Flat 3-Runner重叠九脚Stackable 9-Leg

食品与饮料Food and beverage

可水洗、不霉变、无木屑污染。接触面材料需按食品接触要求单独确认。Washable, no mould, no wood dust. Food-contact compliance must be confirmed separately for the deck surface.

平板田字Flat Grid待确认To confirm

仓储与配送中心Warehousing

托盘池、周转、自动立库。尺寸一致性好,跑输送线不卡。Pools, turns and AS/RS. Consistent dimensions mean fewer jams on conveyors.

重叠九脚Stackable 9-Leg重叠田字Stackable Grid

出口与跨境物流Export logistics

免熏蒸直接出关,北美、欧盟、东南亚航线均可走,不必等处理档期。Straight to the border with no fumigation — North America, EU, Southeast Asia, no treatment queue.

免熏蒸Fumigation-free全系列All series

资质与检测Certifications and testing

测过的写结论,没测的写“待检”。 Tested means a report. Untested means "pending".

这一栏我们不写成“全部通过”。每一项都会附第三方报告编号与日期,索取时可直接发你。 We will not write "all passed" here. Each line will carry a third-party report number and date, sent on request.

ROHS 有害物质ROHS

重金属与限用物质筛查,出口欧盟必备。Restricted heavy metals and substances — required for the EU.

待送检Pending
REACH · SVHC 高关注物质REACH / SVHC

欧盟 247 项高关注物质筛查,按批次出报告。Screening against the 247-substance candidate list, reported per batch.

待送检Pending
动载 / 静载试验Dynamic / static load test

按系列逐个结构做破坏性加载,给出极限值而非标称值。Destructive loading per structure, reporting ultimate values rather than nominal ratings.

待送检Pending
跌落与角跌落Drop / corner drop

验证边角抗冲击,决定能否用于循环周转。Impact behaviour at corners — the factor that decides returnable use.

待送检Pending
ISPM15 适用性说明ISPM15 applicability

向客户与货代出具材料构成说明,说明为何不属于原木包装、无需熏蒸。A composition statement for customers and forwarders explaining why the pallet is not raw-wood packaging and needs no treatment.

待出具To issue
燃烧性能Flammability

按 GB 8410 水平燃烧法测定燃烧速率。Horizontal burn rate to GB 8410.

待送检Pending

说明:以上为送检计划,尚未取得报告。对外报价与投标时,我们只提供已出报告的项目,未出报告的一律注明“待检”。 Note: The list above is a testing plan, not completed results. In quotations and tenders we only present items with a report in hand; everything else is marked "pending".

先拿两张样品,压一压再谈价格。Take two samples. Load them before we talk price.

告诉我们你的货物重量、集装箱类型和年用量,我们按你的实际工况推荐结构,而不是按库存推荐。Tell us cargo weight, container type and annual volume — we recommend by your duty cycle, not by what is in stock.

直接联系Call sales任总 188 5824 9883+86 188 5824 9883