尺寸与公差Size and tolerance
模压件有脱模斜度,边缘与脚部尺寸存在制造公差,具体数值随模具给出。Molded parts carry draft angles and manufacturing tolerances at edges and feet; values ship with the tooling drawing.
所有型号共用同一套木纤维模压材料与成型工艺,差别在底板结构和脚型。选型只看三件事:货物重量、是否堆码、是否要空托盘嵌套。 Every model shares the same wood-fiber compound and molding process. What changes is the base structure and the feet. Selection comes down to three questions: load weight, stacking, and whether empty pallets must nest.
快速选型Selection guide
| 系列Series | 底板结构Base | 动载 / 静载Dyn. / Stat. | 自重Weight | 典型用途Typical use |
|---|---|---|---|---|
| PJ · 平板九角Flat 9-Leg | 九点支撑,面板平整Nine-point support, flat deck | 1.5 / 3 t | 15–16 kg | 轻中载码垛、自动线、电子件Light-medium stacking, conveyors, electronics |
| PC · 平板川字Flat 3-Runner | 三道纵梁贯通Three continuous runners | 2 / 4 t | 20 kg | 叉车四向作业、化工桶袋Four-way forklift work, drums and bags |
| PT · 平板田字Flat Grid | 井字底架Grid underframe | 2 / 4 t | 20–22 kg | 重载、长距离运输、食品饮料Heavier loads, long hauls, food and beverage |
| DJ · 重叠九脚Stackable 9-Leg | 九脚墩,可嵌套Nine blocks, nestable | 2 / 4 t | 16 kg | 空托盘回程、托盘池、立库Empty returns, pallet pools, AS/RS |
| DT · 重叠田字Stackable Grid | 井字底架 + 可嵌套脚Grid base with nestable feet | 2 / 4 t | 25 kg | 高刚度 + 高堆叠效率Stiffness plus stacking efficiency |
表中载重为设计标称值,实际承载受货物分布、支撑跨距与温度影响;破坏性试验值见资质与检测(待出报告)。 Load ratings are design nominal values; actual capacity depends on load distribution, support span and temperature. Ultimate values from destructive testing are listed under certifications (pending).
九点支撑把载荷分散到九个脚墩,面板整体平整、没有格栅缝隙,小件货物不会掉下去。适合码垛、自动输送线和外观要求高的产品。 Nine support points spread the load across nine blocks. The deck is flat with no grid gaps, so small items cannot fall through. Suited to stacking, conveyor lines and appearance-critical products.
| 型号Model | 尺寸 A×B×C(mm)Size A×B×C (mm) | 动载 / 静载Dyn. / Stat. | 重量Weight |
|---|---|---|---|
| PJ-1210-122 | 1200 × 1000 × 122 | 1.5 t / 3 t | 16 kg |
| PJ-1111-122 | 1100 × 1100 × 122 | 1.5 t / 3 t | 15 kg |
A × B 为面板外廓,C 为总高。其余分格尺寸(A1–A3、B1–B3、C1–C2)见图纸,可按需提供 PDF/DWG。 A × B is the deck footprint, C the overall height. Sub-dimensions (A1–A3, B1–B3, C1–C2) are on the drawing, available as PDF/DWG on request.
三道纵梁贯通全长,叉车从四向都能进叉,载荷沿纵梁传递、不易局部塌陷。化工桶、袋装料、汽车零部件线边配送的常用结构。 Three full-length runners give four-way forklift access and carry load along the beams rather than the deck. The workhorse structure for drums, bags and line-side automotive parts.
| 型号Model | 尺寸 A×B×C(mm)Size A×B×C (mm) | 动载 / 静载Dyn. / Stat. | 重量Weight |
|---|---|---|---|
| PC-1210-132 | 1200 × 1000 × 132 | 2 t / 4 t | 20 kg |
| PC-1111-132 | 1100 × 1100 × 132 | 2 t / 4 t | 20 kg |
川字结构对纵向进叉最友好;若货架横梁方向与纵梁垂直,请提前告知跨距,我们核对挠度。 The 3-runner base is strongest along its runners. If your rack beams run perpendicular to them, tell us the span and we will check deflection.
井字底架在四个方向都形成闭合受力环,抗弯刚度在五个结构里最高。用于单托偏重、运输距离长、或要在货架上短期存放的场合。 The grid base closes a load ring in every direction — the stiffest of the five structures. For heavier unit loads, long hauls, or short-term rack storage.
| 型号Model | 尺寸 A×B×C(mm)Size A×B×C (mm) | 动载 / 静载Dyn. / Stat. | 重量Weight |
|---|---|---|---|
| PT-1210-145 | 1200 × 1000 × 145 | 2 t / 4 t | 22 kg |
| PT-1111-145 | 1100 × 1100 × 145 | 2 t / 4 t | 20 kg |
田字结构总高较高(145 mm),托盘池与货架净高请提前核对。 The grid base is taller (145 mm) — check clear heights in your pool and racking.
九个脚墩的位置与角度经过配对设计,空托盘可以相互嵌套,回程和仓储占用明显下降。同一托型里最轻的一档,适合托盘池与自动立库。 The nine blocks are keyed to one another so empty pallets nest, cutting space on the return leg and in the warehouse. The lightest of the range — built for pools and automated storage.
| 型号Model | 尺寸 A×B×C(mm)Size A×B×C (mm) | 动载 / 静载Dyn. / Stat. | 重量Weight |
|---|---|---|---|
| DJ-1210-130 | 1200 × 1000 × 130 | 2 t / 4 t | 16 kg |
嵌套高度与实际可叠数量取决于脚型公差,批量前我们会提供嵌套样件实测。 Nested height and stack count depend on foot tolerances; we supply a measured nested sample before volume runs.
井字底架叠加可嵌套脚型,是“既要刚度、又要回程效率”的折中。自重最大(25 kg),用于高价值货物与长途循环。 A grid base combined with nestable feet — the compromise when you need both stiffness and return efficiency. The heaviest option at 25 kg, for high-value cargo on long loops.
| 型号Model | 尺寸 A×B×C(mm)Size A×B×C (mm) | 动载 / 静载Dyn. / Stat. | 重量Weight |
|---|---|---|---|
| DT-1210-153 | 1200 × 1000 × 153 | 2 t / 4 t | 25 kg |
自重较大,海运整柜出货时请把托盘自重计入毛重。 The pallet's own weight is significant — include it in the gross weight for container shipments.
通用说明General notes
模压件有脱模斜度,边缘与脚部尺寸存在制造公差,具体数值随模具给出。Molded parts carry draft angles and manufacturing tolerances at edges and feet; values ship with the tooling drawing.
本色为木纤维原色,批次间存在色差;可加色母调色,Logo 可模内成型。Natural fibre colour varies batch to batch; masterbatch tinting and in-mould logos are available.
动载指叉车搬运中的承载,静载指堆码或货架上的均布承载,两者不可互相套用。Dynamic load means load while being moved by forklift; static load means uniformly distributed load when stacked or racked. They are not interchangeable.
标称 −40~60 ℃;长期高湿环境下强度会下降,冷库场景请单独说明。Rated −40 to 60 °C; strength drops under sustained high humidity. Cold-store use must be stated separately.
现货型号与开模定制分开报价;开模周期与模具费按结构复杂度核定。Stock models and new tooling are quoted separately; tooling lead time and cost depend on structural complexity.
货物重量、单托尺寸、堆码层数、年用量、是否出口——五个数字就能定结构。Load weight, unit footprint, stack layers, annual volume, export or not — five numbers settle the structure.
发给工程师Send to engineering